With the development of urbanization construction, safe and efficient aerial work platform is more and more favored by the construction side.

       However, as long as it involves the field of high-altitude work, there will be security risks. How to avoid danger well and reduce the occurrence of accidents is one of the most important issues that every high-altitude operator needs to pay attention to. Whether novice or skilled, for the safe operation of high-altitude work, you need to have a comprehensive understanding and cognition.

     Today we bring you "ten tips for safe operation of aerial work platforms". Ten steps, spend more than ten minutes to make your operation safe no problem!

         1.train

Make sure you have completed the product theory and practical training courses prior to operation, as well as understanding the product you will be operating.

        2.Check

Pre-operation checks and functional tests are performed before each use

         3. Fall protection

A full safety suit is required when operating the machine including a full-body safety harness and a life-line with adjustable length.

       4. Guardrail

Do not sit, stand, or climb the fence for any reason.

       5.On-site risk assessment

For cliffs, caves, ramps, slippery or unstable ground, and overhead obstacles, power supply and other hazards   Carry out risk assessment on dangerous sites.

        6. Suspension point

Do not step off the platform unless you have done a proper safety assessment to ensure that the equipment is equipped。Suitable accessories, and you wear a full set of personal safety protective clothing.

        7.Rescue Plan

In case you are unable to lower the platform, immediately ask the nearest professional colleague for help through the ground control system to help you lower the meter.

        8.Sundries

Keep the platform floor clean and free of debris and remove anything not related to the work. Large materials require special machines for lifting.

        9.Platform Entrance

Check the handrail and door in the middle of the entrance to ensure that it can move up and down and open and close properly to ensure safety.

       10.Regulations & Manuals

Always read and understand the equipment operating manual, site regulations and local laws.